The China-Germany Key Laboratory of Magnetoelectricity and Intelligent Mineral Processing Technology jointly established by HUATE Magnet Technology company and Aachen University of Technology is located at the headquarters of HUATE Magnet Technology Corporation. Through the introduction of German intelligent sensor sorting technology, combined with superconducting magnet application technology and traditional magnetic application technology, it is committed to providing scientific guidance, application demonstrations and backbone talents training for the development of the global mineral processing and sorting industry. At the same time, it also provides a professional public service platform for the National Magneto electric Strategic Alliance and the National Metallurgical and Mining Association.
The laboratory covers an area of 8,600 square meters, and has 120 full-time or part-time test researchers. The laboratory has complete processing equipment, complete testing and analysis instruments, and has good product and mineral test conditions. It has a crushing and grinding area, a dry Method separation area, powder processing pilot test area, intelligent sensor separation area, superconducting magnetic separation area, magnetoelectric separation area, multi-functional continuous selection area, flotation area, reselection area, material inspection area, new product test area. The laboratory has more than 300 sets of various experimental equipment and instruments, 80% of which are above the domestic leading level, of which 20% are up to the international advanced level. At the same time, it is equipped with a photovoltaic power generation system, a circulating water supply system, a central air conditioning system, a water mist dust removal system, and a high-pressure air supply System and other advanced infrastructure provide guarantee.
Intelligent Sensor Separation Area
Equipped with a world-class X-ray, near-infrared, photoelectric intelligent sensor sorting system jointly developed with the German Aachen University of Technology, it realizes the extraction of the surface and internal characteristics of the ore at ultra-high speed, using existing technology and German intelligent advanced The combination of Industry 4.0 technology solves the problem of dry pre-selection and waste disposal of ore and fills the domestic gap. The experimental area is equipped with an industrialized separation experimental production line, where various ores of 1-300mm can be separated. Its working principle is that all ore is identified one by one when passing the position of the sensor, the identified data is transmitted to the computer control system for analysis and comparison, and the analysis instruction is passed to the subsequent actuators, and the useful ore and waste are transferred through the injection system. The stones are separated to realize a pre-sorting function. The industrial application significance of this product lies in: 1. It replaces manual selection and reduces labor intensity. 2. Throws away waste rocks in the ore and improves the grade of the ore before grinding, thereby reducing the cost of grinding. 3. Reduction after grinding The produced fine tailings output reduces the storage capacity of the tailings pond, and can well reduce the environmental pressure caused by the tailings.
Superconducting Magnetic Separation Area
The cryogenic superconducting magnetic separator is a up-market industrial experimental machine jointly developed with the Chinese Academy of Sciences. It is also the magnetic separator with the highest magnetic field strength in the world. The magnetic field strength of the traditional electromagnetic high-gradient magnetic separator is only 1.8 Tesla, and it can reach 5.5 Tesla. It is mainly used in the fields of impurity removal and purification of non-metallic minerals, rare metal minerals with weak magnetic minerals, and sewage treatment. At present, it has achieved good experimental results and extensive industrial applications in kaolin, rare earth and other industries.
Multifunctional continuous selection platform
There is a multi-functional experimental production line system on the large steel structure platform, where the operating status of the industrial production line of the wet concentrator can be simulated, and the whole process and semi-industrial beneficiation experiment of various minerals can be carried out such as grinding-grading-beneficiation-dehydration , Through the universal combination of different testing machines, it can meet the selection process required by various minerals. Through this whole-process systematic experiment, the reliability and stability of the experimental data are more ensured.
Wet separation test area
Equipped with grinding area, magnetic separation area, gravity separation area, flotation area, dehydration area and drying area. A single-machine test of a small sample of minerals can be performed here to determine the selectivity of the ore and explore the beneficiation conditions.
Dry processing sorting area
It is equipped with various crushing equipment such as high-pressure roller mill, jaw crusher, various dry beneficiation equipment such as electromagnetic and permanent magnet, and powder equipment such as ultra-fine grinding and grading, which can crush ore from large pieces to various required Particle size, and various dry separation operations can be carried out. At the same time, it is also equipped with an advanced water mist dust removal device to ensure the cleanliness of the environment.
Other supporting areas
Equipped with mineral sample receiving and storage area, representative mineral sample display area from all over the world, operation platform, etc.
This laboratory can realize the experimental research work on various non-ferrous metals, ferrous metals and non-metallic complex and difficult to select ores. Including magnetite, hematite, limonite, manganese ore, chromium ore, ilmenite, gold, platinum, silver, copper ore, lead-zinc ore, tungsten molybdenum antimony ore beneficiation technology, potassium albite, quartz, Purification of kaolin, lepidolite, fluorite, graphite and other non-metallic minerals, comprehensive utilization of various secondary resources. Provide guiding suggestions for the feasibility of the construction of the concentrator.
Shandong Huate Magnet Technology Co., Ltd. specializes in the production of high-pressure roller mills, rod mills, ball mills, mechanical pulverizers, air current classifiers, low temperature superconducting magnetic separators, vertical ring high gradient magnetic separators, electromagnetic slurry high Gradient magnetic separator, JCTN refinement and slag reduction magnetic separator, electromagnetic elutriation concentrator, suspension magnetic separator, centrifuge, desilter, etc. crushing, grinding, magnetic separation, gravity separation equipment and crushing, grinding, Magnetic (heavy, flotation) EPC turnkey project. The scope of services covers more than 10 fields including mining, coal, electric power, metallurgy, non-ferrous metals, environmental protection, and medical treatment. The products are exported to the United States, Germany, South Africa, Brazil, India, Australia and other countries, with more than 20,000 customers.
Shandong Hengbiao Inspection and Testing Co., Ltd. has a total area of more than 1,800 square meters, fixed assets of more than 6 million yuan, and 25 professional inspection and testing personnel, including 10 senior engineers and laboratory technicians. It provides professional services for mining and metal materials related industrial chain industries. A public service platform recognized by the state and capable of independently assuming legal responsibilities for services such as inspection and testing, information technology consulting, education and training. Operate and service in accordance with CNAS-CL01:2018 (Criteria for Accreditation of Testing and Calibration Laboratories). There are chemical analysis room, instrument analysis room, material testing room, physical performance testing room and so on. There are more than 200 major instruments and equipment such as Thermo Fisher X-ray fluorescence spectrometer, atomic absorption spectrometer, plasma emission spectrometer, carbon-sulfur analyzer, direct reading spectrometer, impact testing machine, universal testing machine and so on.
The detection range includes non-metals (quartz, feldspar, kaolin, mica, fluorite, etc.) and metals (iron, manganese, chromium, titanium, vanadium, tungsten, molybdenum, lead, zinc, nickel, gold, silver, rare earth minerals, etc.) Elemental chemical analysis of minerals, material and physical performance testing of stainless steel, carbon steel, copper, aluminum and other metal materials.
contact us:
Tel: +86 -536-3391868 +86 -536-3153243
Add: 6999 Huate Road Linqu County, Weifang, Shandong,China
Website: www.huatemagnets.com
Email: engineering@chinahuate.com
Post time: Sep-04-2020